These pumps are designed to pump ‘tough to handle’ fluids with ease. Base on a modular concept and modern pumping elements stator, solid shaft and double sealed Cardan Universal Joints for improved performance and longer service life. These pumps are available in bare shaft and close coupled configuration with accessories such as Dry Running Protection Device, Pressure Switch, Gauges, Relief valves and Strainers.
RD series: Capacity 0.11-17 m3/hr / Pressure 6-48 bar
RM series: Capacity 4-250 m3/hr / Pressure 12-48 bar
RL series: Capacity 14-420 m3/hr / Pressure 6 bar
WM series: Capacity 7-150 m3/hr / Pressure 12-48 bar
KM series: Capacity 5-100 m3/hr / Pressure 12-48 bar
DM series: Capacity 6.5-86 m3/hr / Pressure 6-24 bar
RJ series: Capacity 6.9-500 LPH / Pressure 6-24 bar
DC series: Capacity 200-8000 LPH / Pressure 2.8 bar
Positive Displacement - Single rotating element, deliver a uniform, metered and non-pulsating flow. The head developed is independent of the rotational speed, where as the capacity is proportionate to the speed.
Self priming - Inherently self-priming that work on shore and do not require foot valve.
Non-Clogging - Can handle solid in suspension or media with high percentage of solids.
Low NPSH Requirement - Suction lift capabilities of up to 9.5mwc and effective in high vacuum conditions.
Low Internal Velocity - Minimum degradation of share-sensitive media and can handle highly viscous materials having pseudo-plastic characteristics.
Reversible - Can perform with equal efficiency in either direction.
Silent Running - Rotors turn inside a resilient stator and thus generate little noise.
Separate Bearing Housing - Fluids can be pumped without any contamination.
Wetted Components: Cast Iron, Cast Stainless Steel, Fabricated Steel, Fabricated Stainless Steel, UV resistant acetant co-polymer
Stator: Natural, Nitrile, High Nitrile, EPDM, Chloro-Sulphonated Rubber, Fluoroelastomer, Aflas, HNBR
Rotor: Tool Steel, Case Hardened Steel, Alloy Steel, Stainless Steel, Hard Chrome plating
Rotor Surface Coating: Ceramic Coatings, Tungsten Carbide, Hard Chrome Plating.
Coupling Rod & Shaft: Alloy Steel, Stainless Steel
Other Materials: Duplex, Super Duplex, Alloy 20, Hastealloy.
Protective coatings: Rubber Lining, Epoxy Coatings.
Seal Code M & L - Single acting, unbalance, single helical coil spring, elastomeric bellow seal bi-directional (up to 12 bar)
Seal Code N & P - Single acting, unbalance, bi-directional, wave spring (up to 25 bar)
Seal Code R & S - Single acting, unbalance, bi-directional, multiple spring (up to 25 bar)
Seal Code T - Double acting, multiple spring, unbalanced, bi-directional (up to 25 bar)
Seal Code V - Single acting, balance, bi-directional, metal bellow (up to 12 bar)
Paper, Sugar, Agriculture, Oil & Gas, Paint, Varnish & Ink, Mining, Chemicals, Food, Explosives, Fibre, Construction, Wine & Beverages, Ceramic, Edible Oil, Cosmetics, Toiletries, Dye, Marine, Waste Water Treatment, Pharmaceutical, Power Plant, Fertilizers, Steel
